• R/O
  • HTTP
  • SSH
  • HTTPS

List of commits

Tags
No Tags

Frequently used words (click to add to your profile)

javac++androidlinuxc#windowsobjective-cqtcocoa誰得pythonphprubygameguibathyscaphec翻訳計画中(planning stage)omegatframeworktwittertestdomvb.netdirectxbtronarduinopreviewerゲームエンジン

RSS
Rev. Tiempo Autor
c797785 master 2011-02-21 16:30:55 Sandeep Paulraj

ARM: Update mach-types

This commit updates the mach-types based on the latest
in linus's head

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

0952ea1 2011-02-21 16:30:55 Fabio Estevam

arm1136 relocation: Fix calculation of board_init_r

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

428f718 2011-02-21 16:30:55 Fabio Estevam

arm1136: Fix NAND boot

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>

3a8a83e 2011-02-21 16:30:55 Po-Yu Chuang

arm: get_sp() should always be compiled

get_sp() was incorrectly excluded if none of
CONFIG_SETUP_MEMORY_TAGS
CONFIG_CMDLINE_TAG
CONFIG_INITRD_TAG
CONFIG_SERIAL_TAG
CONFIG_REVISION_TAG
were defined.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>

ea4bc12 2011-02-21 16:30:55 Lei Wen

Pantheon: Add Board Support for Marvell dkb board

DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with
* Processor upto 806Mhz
* LPDDR1/2
* x8/x16 SLC/MLC NAND
* Footprints for eMMC & MMC x8 card

With Peripherals:
* Parallel LCD I/F
* Audio codecs (88PM8607)
* MIPI CSI-2 camera
* Marvell 88W8787 802.11n/BT module
* Marvell 2G/3G RF
* Dual analog mics & speakers, headset jack, LED, ambient
* USB2.0 HS host, OTG (mini AB)
* GPIO, GPIO expander with DIP switches for easier selection
* UART serial over USB, CIR

This patch adds basic board support with DRAM and UART functionality

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

a03774e 2011-02-21 16:30:55 Lei Wen

mvmfp: add MFP configuration support for PANTHEON

This patch adds the Multiple Function Pin configuration support for
Marvell PANTHEON SoCs

Signed-off-by: Lei Wen <leiwen@marvell.com>

b5d807f 2011-02-21 16:30:55 Lei Wen

serial: add pantheon soc support

Signed-off-by: Lei Wen <leiwen@marvell.com>

896e2ca 2011-02-21 16:30:55 Lei Wen

ARM: Add Support for Marvell Pantheon Familiy SoCs

Pantheon Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref:
http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf

SoC versions Supported:
1) PANTHEON920 (TD)
2) PANTHEON910 (TTC)

Signed-off-by: Lei Wen <leiwen@marvell.com>

cf946c6 2011-02-21 16:30:55 Lei Wen

mv: seperate kirkwood and armada from common setting

Since there are lots of difference between kirkwood and armada series,
it is better to seperate them but still keep the most common file
shared by all marvell platform in the mv-common configure file.

This patch move the kirkwood only driver definitoin in mv-common to
the <soc_name>/config.h.

This patch is tested with compilation for armada100 and guruplug.

Signed-off-by: Lei Wen <leiwen@marvell.com>

495df3b 2011-02-21 16:30:55 Wolfgang Denk

ARM: fix write*() I/O accessors

Commit 3c0659b "ARM: Avoid compiler optimization for readb, writeb
and friends." introduced I/O accessors with memory barriers.
Unfortunately the new write*() accessors introduced a bug:

The problem is that the argument "v" gets evaluated twice. This
breaks code like used here (from "drivers/net/dnet.c"):

for (i = 0; i < wrsz; i++)
writel(*bufp++, &dnet->regs->TX_DATA_FIFO);

Use auxiliary variables to avoid such problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: Dirk Behme <dirk.behme@googlemail.com>

6087f1a 2011-02-21 16:30:55 Alexander Stein

arm relocation: Fix calculation of board_init_r

Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>

ee4bbbc 2011-02-21 16:30:55 Tom Warren

arm: Tegra2: Add support for NVIDIA Seaboard board

Signed-off-by: Tom Warren <twarren@nvidia.com>

efc05ae 2011-02-21 16:30:55 Tom Warren

arm: Tegra2: Add support for NVIDIA Harmony board

Signed-off-by: Tom Warren <twarren@nvidia.com>

2ee3678 2011-02-21 16:30:55 Tom Warren

serial: Add Tegra2 serial port support

Signed-off-by: Tom Warren <twarren@nvidia.com>

3f82b1d 2011-02-21 16:30:54 Tom Warren

arm: Tegra2: Add basic NVIDIA Tegra2 SoC support

Signed-off-by: Tom Warren <twarren@nvidia.com>

9b6442f 2011-02-21 16:30:54 Fabio Estevam

mx31pdk: Make the full boot log visible

Use board_early_init_f so that the full boot log output can be displayed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

ed3df72 2011-02-21 16:30:54 Fabio Estevam

mx31pdk: Use the new relocation scheme

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

0b50951 2011-02-21 16:30:54 Loïc Minier

EfikaMX: switch to MACH_TYPE_MX51_EFIKAMX

Upstream linux moved from MACH_TYPE_MX51_LANGE51 to
MACH_TYPE_MX51_EFIKAMX.

Signed-off-by: Loïc Minier <loic.minier@linaro.org>

c650e1b 2011-02-20 04:32:38 Remy Bohmer

Fix compile warning in net/eth.c

Signed-off-by: Remy Bohmer <linux@bohmer.net>

3a26c43 2011-02-20 04:32:38 Remy Bohmer

Fix build warnings in cmd_flash.c

These variables are only used in case CONFIG_SYS_NO_FLASH is NOT set:
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;

Signed-off-by: Remy Bohmer <linux@bohmer.net>

e4ae666 2011-02-20 04:32:38 Vitaly Kuzmichev

USB-RNDIS: Send RNDIS state on disconnecting

Add waiting for receiving Ethernet gadget state on the Windows host
side before dropping pullup, but keep it for debug.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

7612a43 2011-02-20 04:32:37 Vitaly Kuzmichev

USB: Add USB RNDIS gadget protocol

Port USB gadget RNDIS protocol support from linux-2.6.26
(.27 gadget stack actually has composite drivers).

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

8b6b66b 2011-02-20 04:32:37 Vitaly Kuzmichev

USB-CDC: Move struct declaration before its use

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

c85d70e 2011-02-20 04:32:37 Vitaly Kuzmichev

USB-CDC: Port struct net_device_stats

Port struct net_device_stats and statistics collecting needed for
RNDIS protocol.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

b3649f3 2011-02-20 04:32:36 Vitaly Kuzmichev

USB-CDC: handle interrupt after dropped pullup

Disconnecting USB gadget with pending interrupt may cause its wrong
handling in the next time when interface will be started again
(especially actual for RNDIS). This interrupt may force the gadget
to queue unexpected response before setup stage.
Despite the fact that such interrupt handled after dropped pullup
also may add pending response, this will not bring to any issues due to
usb_ep_disable (which clears the queue) called on gadget unregistering.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>

9b70e00 2011-02-20 04:32:36 Simon Glass

Add support for ASIX AX88772 USB 2.0 10/100Mbit Ethernet Adaptor

Driver originally written by NVIDIA Corporation, modified to
handle odd-length packets.

Signed-off-by: Simon Glass <sjg@chromium.org>

89d4836 2011-02-20 04:32:36 Simon Glass

Add USB host ethernet adapter support

This adds support for using USB Ethernet dongles in host mode. This is just
the framework - drivers will come later. A new config option called
CONFIG_USB_HOST_ETHER can be defined in board config files to switch this
on.

The was originally written by NVIDIA and was cleaned up for release by the
Chromium authors.

Signed-off-by: Simon Glass <sjg@chromium.org>

96820a3 2011-02-20 04:32:34 Simon Glass

Fix EHCI usb submit timeout and unify with OHCI

Changed both to use a common timeout for URB submission, since they were using
different values and EHCI's was too short.

Also fixed EHCI to actually check if urb submission succeeded, rather than
silently continuing into the weeds.

Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82

Signed-off-by: Simon Glass <sjg@chromium.org>

efb0633 2011-02-16 06:09:50 Yoshihiro Shimoda

add checking the CONFIG_ENV_IS_IN_SPI_FLASH in Enbedded env

Fix the problem which cannot build the U-boot, if we only set
the CONFIG_ENV_IS_IN_SPI_FLASH.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

327f55c 2011-02-16 05:55:41 Nobuhiro Iwamatsu

net: ne2000: Add spport RTL-8019AS

Add infomation of RTL-8016AS to hw_info.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Ben Warren <biggerbadderben@gmail.com>