• R/O
  • HTTP
  • SSH
  • HTTPS

List of commits

Tags
No Tags

Frequently used words (click to add to your profile)

javac++androidlinuxc#windowsobjective-cqtcocoa誰得pythonphprubygameguibathyscaphec翻訳計画中(planning stage)omegatframeworktwittertestdomvb.netdirectxbtronarduinopreviewerゲームエンジン

RSS
Rev. Tiempo Autor
2996b64 2022-07-21 22:16:59 Tom Rini

Merge https://source.denx.de/u-boot/custodians/u-boot-marvell

- turris: Misc updates (Pali)
- mvebu: handle non-zero base address for RAM (Chris)
- mvebu: add support for Methode eDPU (Robert)
- mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals
(Pali)
- tlv_eeprom: Add missing CRC32 dependency (Pali)
- treewide: Fix Marek's name and change my e-mail address (Marek)
- mvebu: eDPU/uDPU: Misc updates (Robert)
- mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times
(Pali)

ca85b5a 2022-07-21 17:14:04 Pali Rohár

arm: mvebu: turris_omnia: Set ETHPRIME to DT alias

CONFIG_ETHPRIME can be set to DT node name or alias which refers to DT
node. Define ethernet aliases and set ETHPRIME to eth2 which refers to WAN
ethernet port. This removes hardcoded DT node name from U-Boot
configuration file.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

3308933 2022-07-21 17:14:04 Pali Rohár

arm: mvebu: Avoid reading MVEBU_REG_PCIE_DEVID register too many times

Change detection of platform/cpu from runtime to compile time via config
define. This completely eliminates compiling code which is not going to run
on selected platform. Code which parses and prints device / revision id
still reads device id from MVEBU_REG_PCIE_DEVID register, but only once.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

569b8b8 2022-07-21 17:14:04 Robert Marko

mvebu: uDPU: disable non-present peripherals

uDPU like eDPU does not expose SCSI based peripherals like SATA nor PCI
and for sure it does not have the Intel E1000 PCI card.

So, like for eDPU remove those from the defconfig.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

ed0be7e 2022-07-21 17:14:04 Robert Marko

mvebu: eDPU: disable SCSI support

eDPU does not use SCSI nor it has SATA exposed, and commit
arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals
now allows compiling U-boot wihout all of the BOOT_TARGET_DEVICES since
not all boards have all of the listed peripherals exposed.

So, disable SCSI support in defconfig for eDPU.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

61143f7 2022-07-21 17:14:04 Marek Behún

treewide: Fix Marek's name and change my e-mail address

Fix diacritics in some instances of my name and change my e-mail address
to kabel@kernel.org.

Add corresponding .mailmap entries.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

8a7880f 2022-07-21 17:14:04 Marek Behún

board: turris: Fix MAINTAINERS and add Pali

Fix MAINTAINERS files for Turris devices, add missing files and add Pali
as maintainer.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>

56e3d6e 2022-07-21 17:14:04 Pali Rohár

tlv_eeprom: Add missing CRC32 dependency

tlv_eeprom uses crc32() function, so add dependency into Kconfig.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>

35ed176 2022-07-21 17:14:04 Pali Rohár

arch: mvebu: Disable by default unused peripherals in SPL

SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and
therefore support for other binary formats is not required to be present in
SPL. Boot source of proper U-Boot is defined by compile time options and
therefore it is not required to enable all possible and unused peripherals
in SPL by default.

This change decrease size of SPL binaries.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

daa8857 2022-07-21 17:14:04 Pali Rohár

arm: mvebu: a3720: Add NVMe to BOOT_TARGET_DEVICES list

Enable NVMe booting on boards which have enabled NVMe drivers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

3a57ad0 2022-07-21 17:14:04 Pali Rohár

arm: mvebu: a3720: Set BOOT_TARGET_DEVICES list to enabled peripherals

This allows to compile U-Boot without some boot option for some A3720 board
which does not have that peripheral.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

040978a 2022-07-21 17:14:04 Robert Marko

MAINTAINERS: add myself as Methode maintainer

I am currently maintaing the Methode uDPU and eDPU boards so add myself
as the maintainer for them.

Remove the old entry from board/Marvell/mvebu_armada-37xx/MAINTAINERS.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>

b4108f3 2022-07-21 17:14:04 Robert Marko

arm: mvebu: add support for Methode eDPU

Methode eDPU is an Armada 3720 power board based on the Methode uDPU.

They feature the same CPU, RAM, and storage as well as the form factor.

However, eDPU only has one SFP slot plus a copper G.hn port which does not
work under U-boot.

In order to reduce duplication, split the uDPU DTS into a common one.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>

1fc45d6 2022-07-21 15:09:06 Paul Doelle

watchdog: add pulse support to gpio watchdog driver

A common external watchdog circuit is kept alive by triggering a short
pulse on the reset pin. This patch adds support for this use case, while
making the algorithm configurable in the devicetree.

The "linux,wdt-gpio" driver being modified is based off the equivalent
driver in the Linux kernel, which provides support for this algorithm.
This patch brings parity to this driver, and is kept aligned with
the functionality and devicetree configuration in the kernel.

It should be noted that this adds a required property named 'hw_algo'
to the devicetree binding, following suit with the kernel. I'm happy to
make this backward-compatible if preferred.

Signed-off-by: Paul Doelle <paaull.git@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

818055f 2022-07-21 15:09:06 Philippe Boos

watchdog: add amlogic watchdog support

Add support for hardware watchdog timer for Amlogic SoCs.
This driver has been heavily inspired by his Linux equivalent
(meson_gxbb_wdt.c).

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Signed-off-by: Philippe Boos <pboos@baylibre.com>
Reviewed-by: Stefan Roese <sr@denx.de>

eff6f3d 2022-07-21 15:09:06 Stefan Roese

mips: octeon: octeon_ebb7304_defconfig: Enable watchdog support

This patch enables the recently added watchdog support on the MIPS
Octeon EBB7304 eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

1aa2b85 2022-07-21 15:09:06 Stefan Roese

watchdog: octeontx_wdt: Add MIPS Octeon support

This patch adds support for the Marvell Octeon watchdog driver, which
currently only support the ARM64 Octeon TX & TX2 platforms. Since the
IP is pretty similar, it makes sense to extend this driver to also
support the MIPS Octeon SoC.

A follow-up patch will enable this watchdog support on the EBB7304
eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>

58b3965 2022-07-21 14:46:10 Robert Marko

arm: mvebu: dts: sync DTS

Update the uDPU DTS to the version that is pending upstream [1][2][3][4].

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-4-robert.marko@sartura.hr/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-5-robert.marko@sartura.hr/
[3] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-6-robert.marko@sartura.hr/
[4] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220516124828.45144-7-robert.marko@sartura.hr/

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Stefan Roese <sr@denx.de>

8fd3cf2 2022-07-21 14:46:10 Chris Packham

arm64: mvebu: handle non-zero base address for RAM

board_get_usable_ram_top() conflated the RAM size with the top address
of RAM. On systems where RAM starts at address 0 these numbers are the
same so it went unnoticed. Update board_get_usable_ram_top() to take
CONFIG_SYS_SDRAM_BASE into account when determining the top address.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

e33879a 2022-07-21 14:46:10 Pali Rohár

board: turris: Find atsha device by atsha driver

It does not matter what is DT node name of atsha device. So find it via
atsha driver and not by DT node name.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

88d931a 2022-07-20 20:38:49 Tom Rini

Merge tag 'for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-ubi

ubifs changes for 2022.10

UBIFS fixes from Pali Rohar:

- ubifs: Fix ubifs_assert_cmt_locked
- ubifs: Use U-Boot assert() from <log.h>

e2e6caa 2022-07-20 12:50:13 Pali Rohár

ubifs: Use U-Boot assert() from <log.h> in UBI/UBIFS code

U-Boot already provides assert function, so it use also in ubi and ubifs code.

Signed-off-by: Pali Rohár <pali@kernel.org>

b4f2105 2022-07-20 12:49:57 Pali Rohár

ubifs: Fix ubifs_assert_cmt_locked()

U-Boot does not implement down_write_trylock() and its stub always returns
true that lock was acquired. Therefore ubifs_assert_cmt_locked() assert
currently always fails.

Fix this issue by redefining ubifs_assert_cmt_locked() to just empty stub
as there is nothing to assert.

Signed-off-by: Pali Rohár <pali@kernel.org>

319d309 2022-07-20 04:54:57 Tom Rini

Merge https://source.denx.de/u-boot/custodians/u-boot-usb

5eefa93 2022-07-20 04:54:41 Tom Rini

Merge tag 'for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-i2c

i2c changes for 2022.10

- new driver nuvoton, NPCM7xx from Jim Liu

Fixes:

- ast_i2c: Remove SCL direct drive mode
from Eddie James

- avoid dynamic stack use in dm_i2c_write

bloat-o-meter drivers/i2c/i2c-uclass.o.{0,1}
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-144 (-144)
Function old new delta
dm_i2c_write 552 408 -144
Total: Before=3828, After=3684, chg -3.76%

patch from Rasmus Villemoes

fc97ff2 2022-07-19 23:52:15 Tom Rini

Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi

To quote Andre:

One prominent feature is the restructering of the clock driver, which
allows to end up with one actual driver for all variants, although we
still only compile in support for one SoC.
Also contained are some initial SPI fixes, which should fix some
problems, and enable SPI flash support for the F1C100s SoC. Those
patches revealed more problems, I will queue fixes later on, but for
now it should at least still work.
Apart from some smaller fixes (for instance for NAND operation), there
is also preparation for the upcoming Allwinner D1 support, in form of
the USB PHY driver. There are more driver support patches to come.

The gitlab CI completed successfully, including the build test for all
160 sunxi boards. I also boot tested on a few boards, but didn't have
time for more elaborate tests this time.

49f3a42 2022-07-19 20:46:28 Rasmus Villemoes

i2c: avoid dynamic stack use in dm_i2c_write

The size of the dynamic stack allocation here is bounded by the if()
statement. However, just allocating the maximum size up-front and
doing malloc() if necessary avoids code duplication (the
i2c_setup_offset() until the invocation of ->xfer), and generates much
better (smaller) code:

bloat-o-meter drivers/i2c/i2c-uclass.o.{0,1}
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-144 (-144)
Function old new delta
dm_i2c_write 552 408 -144
Total: Before=3828, After=3684, chg -3.76%

It also makes static analysis of maximum stack usage (using the .su
files that are automatically generated during build) easier if there
are no lines saying "dynamic".

[This is not entirely equivalent to the existing code; this now uses
the stack for len <= 64 rather than len <= 63, but that seems like a
more natural limit.]

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Heiko Schocher <hs@denx.de>

2b77eea 2022-07-19 20:46:28 Jim Liu

i2c: nuvoton: Add NPCM7xx i2c driver

Add Nuvoton BMC NPCM750 i2c driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

6ac2553 2022-07-19 20:46:28 Eddie James

i2c: ast_i2c: Remove SCL direct drive mode

SCL direct drive mode prevents communication with devices that
do clock stretching, so disable. The Linux driver doesn't use
this mode, and the engine can handle clock stretching.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: ryan_chen <ryan_chen@aspeedtech.com>

25ba5be 2022-07-19 07:48:37 Samuel Holland

phy: sun4i-usb: Add D1 variant

D1 has a register layout like A100 and H616, with the moved SIDDQ bit.
Unlike H616 it does not have any dependencies between PHY instances.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>