Daniel Lezcano
danie****@linar*****
2016年 7月 7日 (木) 17:01:03 JST
ForkThe init functions do not return any error. They behave as the following:
- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly
or
- print an error and let the caller unaware if the state of the system
Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.
Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: Daniel Lezcano <danie****@linar*****>
---
drivers/clocksource/h8300_timer8.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index c151941..0292a19 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -164,24 +164,26 @@ static struct timer8_priv timer8_priv = {
},
};
-static void __init h8300_8timer_init(struct device_node *node)
+static int __init h8300_8timer_init(struct device_node *node)
{
void __iomem *base;
- int irq;
+ int irq, ret;
struct clk *clk;
clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_err("failed to get clock for clockevent\n");
- return;
+ return PTR_ERR(clk);
}
+ ret = ENXIO;
base = of_iomap(node, 0);
if (!base) {
pr_err("failed to map registers for clockevent\n");
goto free_clk;
}
+ ret = -EINVAL;
irq = irq_of_parse_and_map(node, 0);
if (!irq) {
pr_err("failed to get irq for clockevent\n");
@@ -205,11 +207,12 @@ static void __init h8300_8timer_init(struct device_node *node)
clockevents_config_and_register(&timer8_priv.ced,
timer8_priv.rate, 1, 0x0000ffff);
- return;
+ return 0;
unmap_reg:
iounmap(base);
free_clk:
clk_put(clk);
+ return ret;
}
-CLOCKSOURCE_OF_DECLARE(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(h8300_8bit, "renesas,8bit-timer", h8300_8timer_init);
--
1.9.1