Commit: 093054d088f47efc241c5752d5070a028ecbe849 - xinput_calibrator (git)

A generic touchscreen calibration program for X.Org

Commit MetaInfo

• Revisión: 093054d088f47efc241c5752d5070a028ecbe849 (tree)
• Tiempo: 2012-06-22 15:34:50
• Autor: Tias Guns <tias@ulys...>
• Commiter: Tias Guns

Log Message

EvdevTester with evdev 2.7.0 emulation code

Cambiar Resumen

• modified: src/Makefile.am
• modified: src/calibrator/Evdev.cpp
• modified: src/calibrator/Evdev.hpp
• add: src/calibrator/EvdevTester.cpp
• add: src/calibrator/EvdevTester.hpp
• modified: src/calibrator/Makefile.am
• modified: src/tester.cpp

Diferencia incremental

--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -51,7 +51,7 @@ xinput_calibrator_CXXFLAGS = $(XINPUT_CFLAGS) $(GTKMM_CFLAGS) $(AM_CXXFLAGS)
 xinput_calibrator_LDFLAGS = -Wl,--as-needed
 endif
 
-tester_SOURCES = tester.cpp calibrator.cpp calibrator/Tester.cpp
+tester_SOURCES = tester.cpp calibrator.cpp calibrator/Tester.cpp calibrator/Evdev.cpp calibrator/EvdevTester.cpp
 tester_LDADD = $(XINPUT_LIBS) $(XRANDR_LIBS) $(X11_LIBS)
 tester_CXXFLAGS = $(XINPUT_CFLAGS) $(X11_CFLAGS) $(XRANDR_CFLAGS) $(AM_CXXFLAGS)
 

--- a/src/calibrator/Evdev.cpp
+++ b/src/calibrator/Evdev.cpp
@@ -160,6 +160,14 @@ CalibratorEvdev::CalibratorEvdev(const char* const device_name0,
 #endif // HAVE_XI_PROP
 
 }
+// protected pass-through constructor for subclasses
+CalibratorEvdev::CalibratorEvdev(const char* const device_name0,
+                                 const XYinfo& axys0,
+                                 const int thr_misclick,
+                                 const int thr_doubleclick,
+                                 const OutputType output_type,
+                                 const char* geometry)
+  : Calibrator(device_name0, axys0, thr_misclick, thr_doubleclick, output_type, geometry) { }
 
 // Destructor
 CalibratorEvdev::~CalibratorEvdev () {

--- a/src/calibrator/Evdev.hpp
+++ b/src/calibrator/Evdev.hpp
@@ -38,10 +38,24 @@ private:
     XDeviceInfo *devInfo;
     XDevice     *dev;
 
+protected:
+    // protected constructor: should only be used by subclasses!
+    // (pass-through to Calibrator)
+    CalibratorEvdev(const char* const device_name,
+                    const XYinfo& axys,
+                    const int thr_misclick=0,
+                    const int thr_doubleclick=0,
+                    const OutputType output_type=OUTYPE_AUTO,
+                    const char* geometry=0);
+
 public:
-    CalibratorEvdev(const char* const device_name, const XYinfo& axys,
-        XID device_id=(XID)-1, const int thr_misclick=0, const int thr_doubleclick=0,
-        const OutputType output_type=OUTYPE_AUTO, const char* geometry=0);
+    CalibratorEvdev(const char* const device_name,
+                    const XYinfo& axys,
+                    XID device_id=(XID)-1,
+                    const int thr_misclick=0,
+                    const int thr_doubleclick=0,
+                    const OutputType output_type=OUTYPE_AUTO,
+                    const char* geometry=0);
     ~CalibratorEvdev();
 
     virtual bool finish_data(const XYinfo new_axys);

--- /dev/null
+++ b/src/calibrator/EvdevTester.cpp
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2009 Tias Guns
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "calibrator/Evdev.hpp"
+#include "calibrator/EvdevTester.hpp"
+
+#include <cstdio>
+
+CalibratorEvdevTester::CalibratorEvdevTester(const char* const device_name0, const XYinfo& axys0, const int thr_misclick, const int thr_doubleclick, const OutputType output_type, const char* geometry)
+  : CalibratorEvdev(device_name0, axys0, thr_misclick, thr_doubleclick, output_type, geometry)
+{
+    //printf("Starting test driver\n");
+}
+
+bool CalibratorEvdevTester::finish_data(const XYinfo axis)
+{
+    new_axis = axis;
+
+    return true;
+}
+
+XYinfo CalibratorEvdevTester::emulate_driver(const XYinfo& raw, bool useNewAxis, const XYinfo& screen, const XYinfo& device) {
+    XYinfo calibAxis;
+    if (useNewAxis)
+        calibAxis = new_axis;
+    else
+        calibAxis = old_axys;
+
+    // call evdev's code (minimally modified to fit us)
+    int mins[2] = {raw.x.min, raw.y.min};
+    evdev_270_processvaluator(device, calibAxis, mins);
+    int maxs[2] = {raw.x.max, raw.y.max};
+    evdev_270_processvaluator(device, calibAxis, maxs);
+
+    XYinfo result(mins[0], maxs[0], mins[1], maxs[1]);
+
+
+    // the last step is usually done by the X server,
+    // or transparently somewhere on the way
+    result.do_xf86ScaleAxis(screen, device);
+    return result;
+}
+
+// return in 'vals'
+void CalibratorEvdevTester::evdev_270_processvaluator(const XYinfo& devAxis, const XYinfo& axis, int* vals)
+{
+        //int vals[2] = {valX, valY};
+        int absinfo_min[2] = {devAxis.x.min, devAxis.y.min};
+        int absinfo_max[2] = {devAxis.x.max, devAxis.y.max};
+
+        /*
+         * Code from xf86-input-evdev: src/evdev.c
+         * function: static void EvdevProcessValuators(InputInfoPtr pInfo)
+         * last change: 2011-12-14 'Fix absolute events with swapped axes'
+         * last change id: 8d6dfd13b0c4177305555294218e366a6cddc83f
+         *
+         * All valuator_mask_isset() test can be skipped here:
+         * its a requirement to have both X and Y coordinates
+         */
+        int i;
+
+        // if (pEvdev->swap_axes) {
+        if (axis.swap_xy) {
+            int swapped_isset[2] = {0, 0};
+            int swapped_values[2];
+
+            for(i = 0; i <= 1; i++) {
+                //if (valuator_mask_isset(pEvdev->vals, i)) {
+                    swapped_isset[1 - i] = 1;
+
+                    /* in all sensible cases, the absinfo is the same for the
+                     * X and Y axis. In that case, the below simplifies to:
+                     * wapped_values[1 - i] = vals[i]
+                     * However, the code below accounts for the oddball
+                     * device for which this would not be the case.
+                     */
+                    swapped_values[1 - i] =
+                        //xf86ScaleAxis(valuator_mask_get(pEvdev->vals, i),
+                        //              pEvdev->absinfo[1 - i].maximum,
+                        //              pEvdev->absinfo[1 - i].minimum,
+                        //              pEvdev->absinfo[i].maximum,
+                        //              pEvdev->absinfo[i].minimum);
+                        xf86ScaleAxis(vals[i],
+                                      absinfo_max[1 - i],
+                                      absinfo_min[1 - i],
+                                      absinfo_max[i],
+                                      absinfo_min[i]);
+                //}
+            }
+
+            for (i = 0; i <= 1; i++) {
+                if (swapped_isset[i])
+                    //valuator_mask_set(pEvdev->vals, i, swapped_values[i]);
+                    vals[i] = swapped_values[i];
+                //else
+                //    valuator_mask_unset(pEvdev->vals, i);
+            }
+        }
+
+        for (i = 0; i <= 1; i++) {
+            int val;
+            int calib_min;
+            int calib_max;
+
+            //if (!valuator_mask_isset(pEvdev->vals, i))
+            //    continue;
+
+            //val = valuator_mask_get(pEvdev->vals, i);
+            val = vals[i];
+
+            if (i == 0) {
+                //calib_min = pEvdev->calibration.min_x;
+                calib_min = axis.x.min;
+                //calib_max = pEvdev->calibration.max_x;
+                calib_max = axis.x.max;
+            } else {
+                //calib_min = pEvdev->calibration.min_y;
+                calib_min = axis.y.min;
+                //calib_max = pEvdev->calibration.max_y;
+                calib_max = axis.y.max;
+            }
+
+            //if (pEvdev->flags & EVDEV_CALIBRATED)
+            if (true)
+                //val = xf86ScaleAxis(val, pEvdev->absinfo[i].maximum,
+                //                    pEvdev->absinfo[i].minimum, calib_max,
+                //                    calib_min);
+                val = xf86ScaleAxis(val, absinfo_max[i],
+                                    absinfo_min[i], calib_max,
+                                    calib_min);
+
+            //if ((i == 0 && pEvdev->invert_x) || (i == 1 && pEvdev->invert_y))
+            if ((i == 0 && axis.x.invert) || (i == 1 && axis.y.invert))
+                //val = (pEvdev->absinfo[i].maximum - val +
+                //       pEvdev->absinfo[i].minimum);
+                val = (absinfo_max[i] - val +
+                       absinfo_min[i]);
+
+            //valuator_mask_set(pEvdev->vals, i, val);
+            vals[i] = val;
+        }
+
+        //return vals;
+}

--- /dev/null
+++ b/src/calibrator/EvdevTester.hpp
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2009 Tias Guns
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef CALIBRATOR_EVDEV_TESTER_HPP
+#define CALIBRATOR_EVDEV_TESTER_HPP
+
+#include "calibrator.hh"
+#include "calibrator/Evdev.hpp"
+
+/***************************************
+ * Class for testing the evdev
+ * calibration routine
+ ***************************************/
+class CalibratorEvdevTester: public CalibratorTesterInterface, public CalibratorEvdev
+{
+protected:
+    // store the new axis for use in driver emulation
+    XYinfo new_axis;
+
+public:
+    CalibratorEvdevTester(const char* const device_name, const XYinfo& axys,
+        const int thr_misclick=0, const int thr_doubleclick=0,
+        const OutputType output_type=OUTYPE_AUTO, const char* geometry=0);
+
+    virtual bool finish_data(const XYinfo new_axis);
+
+    // emulate the driver processing the coordinates in 'raw'
+    virtual XYinfo emulate_driver(const XYinfo& raw, bool useNewAxis, const XYinfo& screen, const XYinfo& device);
+
+    virtual void new_axis_print() {
+        new_axis.print();
+    }
+
+    //* From CalibratorEvdev
+    virtual bool add_click(int x, int y) {
+        return CalibratorEvdev::add_click(x, y);
+    }
+    virtual bool finish(int width, int height) {
+        return CalibratorEvdev::finish(width, height);
+    }
+    
+    // evdev 2.7.0 EvdevProcessValuators code, modified to fit us
+    void evdev_270_processvaluator(const XYinfo& devAxis, const XYinfo& axis, int* vals);
+};
+
+#endif

--- a/src/calibrator/Makefile.am
+++ b/src/calibrator/Makefile.am
@@ -2,4 +2,5 @@ EXTRA_DIST = \
 	Evdev.cpp \
 	Usbtouchscreen.cpp \
 	XorgPrint.cpp \
-	Tester.cpp
+	Tester.cpp \
+	EvdevTester.cpp

--- a/src/tester.cpp
+++ b/src/tester.cpp
@@ -4,6 +4,7 @@
 
 #include "calibrator.hh"
 #include "calibrator/Tester.hpp"
+#include "calibrator/EvdevTester.hpp"
 
 int main() {
     // screen dimensions
@@ -65,7 +66,8 @@ int main() {
         XYinfo raw(raw_coords[c]);
         //printf("Raw: "); raw.print();
 
-        CalibratorTesterInterface* calib = new CalibratorTester("Tester", old_axis);
+        // DO NOT COMMIT THIS
+        CalibratorTesterInterface* calib = new CalibratorEvdevTester("Tester", old_axis);
 
         // clicked from raw
         XYinfo clicked = calib->emulate_driver(raw, false, screen_res, dev_res);// false=old_axis