Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU X3230 @ 2.66GHz (2666.77-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 usable memory = 4280840192 (4082 MB) avail memory = 4111609856 (3921 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a230a2306000a23 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a230a2306000a23 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a230a2306000a23 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr a230a2306000a23 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xdfbec000-0xdfbeffff,0xdfbf0000-0xdfbfffff irq 16 at device 0.0 on pci1 mpt0: [ITHREAD] mpt0: MPI Version=1.5.14.0 mpt0: mpt_cam_event: 0x16 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x16 mpt0: mpt_cam_event: 0x16 mpt0: mpt_cam_event: 0x16 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 2.0 on pci3 pci4: <PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xc8000000-0xcfffffff,0xdfcf0000-0xdfcfffff irq 33 at device 2.0 on pci4 pci4: <unknown> at device 4.0 (no driver attached) uart0: <Non-standard ns8250 class UART with FIFOs> port 0xd8c0-0xd8ff mem 0xdfcef000-0xdfceffff,0xc7f80000-0xc7ffffff irq 34 at device 4.1 on pci4 uart0: [FILTER] pci4: <unknown> at device 4.2 (no driver attached) atapci0: <SiI SiI 0680 UDMA133 controller> port 0xd8a0-0xd8a7,0xd888-0xd88b,0xd8a8-0xd8af,0xd88c-0xd88f,0xd8b0-0xd8bf mem 0xdfceef00-0xdfceefff irq 32 at device 7.0 on pci4 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci5 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:19:b9:f9:5f:5c bge0: [ITHREAD] pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci6: <ACPI PCI bus> on pcib6 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci6 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:19:b9:f9:5f:5d bge1: [ITHREAD] uhci0: <UHCI (generic) USB controller> port 0xbc60-0xbc7f irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xbc80-0xbc9f irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xbca0-0xbcbf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf9ffc00-0xdf9fffff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: waiting for BIOS to give up control usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on uhub3 uhub4: multiple transaction translators uhub4: 4 ports with 4 removable, self powered ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.52, addr 3> on uhub4 kbd2 at ukbd0 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xbc30-0xbc37,0xbc28-0xbc2b,0xbc38-0xbc3f,0xbc2c-0xbc2f,0xbc40-0xbc4f,0xbc50-0xbc5f irq 23 at device 31.2 on pci0 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xcd7ff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd1: <Dell DRAC4, class 0/0, rev 1.10/0.00, addr 2> on uhub0 kbd3 at ukbd1 ums0: <Dell DRAC4, class 0/0, rev 1.10/0.00, addr 2> on uhub0 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 Timecounters tick every 1.000 msec hptrr: no controller detected. device_attach: afd0 attach returned 6 acd0: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave PIO3 acd1: DVDROM <HL-DT-STDVD-ROM GDR-T10N/1.02> at ata4-slave UDMA33 SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! da0 at mpt0 bus 0 target 0 lun 0 da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 139236MB (285155328 512 byte sectors: 255H 63S/T 17750C) Trying to mount root from ufs:/dev/da0s1a mpt0: QUEUE FULL EVENT: Bus 0x00 Target 0x08 Depth 122